Filter
Top Products
84 AT-TQ2403 - Management Software - User's Guide
Field Description
IP Address IP Address for the access point.
MAC
Address
Media Access Control (MAC) address for the specified interface.
A MAC address is a permanent, unique hardware address for any device that represents
an interface to the network. The MAC address is assigned by the manufacturer.
The AT-TQ2403 has a unique MAC address for each interface and has a different MAC
address for each interface on each of its two radios.
VLAN ID Virtual LAN (VLAN) ID.
A VLAN is a software-based, logical grouping of devices on a network that allow them to
act as if they are connected to a single physical network, even though they may not be.
VLANs can be used to establish internal and guest networks on the same access point.
Name
(SSID)
Wireless network name. Also known as the SSID, this alphanumeric key uniquely
identifies a wireless local area network.
The SSID is set on the Basic Settings tab. (See “Provide Network Settings
”.)
Transmit and Receive Information
Field Description
Total Packets Indicates total packets sent (in Transmit table) or received (in Received table) by this
access point.
Total Bytes Indicates total bytes sent (in Transmit table) or received (in Received table) by this
access point.
Throughput Indicates total Mega bits sent (in Transmit table) or received (in Received table) by
this access point during the last one second.
Errors Indicates total errors related to sending and receiving data on this access point.
Associated Wireless Clients
To view the client stations associated with a particular access point, navigate to Status > Client
Associations on the Administration Web pages for the access point you want to monitor.
Figure 36: Client Associations Page