Filter
Top Products
240 AT-TQ2403 - Management Software - User's Guide
2. Set the WPA Versions
Select the WPA version based on what types of client stations you want to support.
Feature or Setting CLI Command
To support WPA clients:
WPA: If all client stations on the
network support the original WPA but
none support the newer WPA2, then
use WPA.
set bss wlan0bssInternal wpa-allowed on
set bss wlan0bssInternal wpa2-allowed off
Feature or Setting CLI Command
To support WPA2 clients:
WPA2: If all client stations on the
network support WPA2, we suggest
using WPA2 which provides the best
security per the IEEE 802.11i standard.
set bss wlan0bssInternal wpa-allowed off
set bss wlan0bssInternal wpa2-allowed on
To support both WPA and WPA2
clients:
Both: If you have a mix of clients, some
of which support WPA2 and others
which support only the original WPA,
select "Both". This lets both WPA and
WPA2 client stations associate and
authenticate, but uses the more robust
WPA2 for clients who support it. This
WPA configuration allows more
interoperability, at the expense of some
security.
set bss wlan0bssInternal wpa-allowed on
set bss wlan0bssInternal wpa2-allowed on
For this example, we’ll set the access point to support WPA client stations only:
AT-TQ2403# set bss wlan0bssInternal wpa-allowed on
AT-TQ2403# set bss wlan0bssInternal wpa2-allowed off
3. Enable Pre-Authentication
If you set WP
A versions to "WPA2" or "Both", you can enable pre-authentication for WPA2 clients.