Filter
Top Products
236 AT-TQ2403 - Management Software - User's Guide
For our example, we’ll disable RADIUS accounting since we’re using the built-in server:
AT-TQ2403# set bss wlan0bssInternal radius-accounting off
5. Get Current Security Settings After Re-Configuring to IEEE 802.1x Security Mod
e
Now we can use the "get" command again to view the updated security configuration and see the results
of our new settings.
The following command gets the security mode in use on the Internal network:
AT-TQ2403# get interface wlan0 security
dot1x
The following command gets details on how the internal BSS is configured, including details on Security.
AT-TQ2403# get bss wlan0bssInternal detail
Property Value
-------------------------------------------------------------------------------
status up
description Internal
radio wlan0
beacon-interface wlan0
mac 00:01:02:03:02:00
dtim-period 2
max-stations 2007
ignore-broadcast-ssid off
mac-acl-mode deny-list
mac-acl-name default
radius-accounting off
radius-ip 127.0.0.1
radius-key secret
radius-port 1812
radius-accounting-port 1813
vlan-tagged-interface br0
open-system-authentication on
shared-key-authentication off
wpa-allow-non-wpa-stations off
wpa-cipher-tkip on
wpa-cipher-ccmp off
wpa-allowed on
wpa2-allowed on
rsn-preauthentication off
Set Security to WPA/WPA2 Personal (PSK)
1. Set the Security Mode
2. Set the WPA Versions
3. Set the Cipher Suites
4. Set the Pre-shared Key
5. Get Current Security Settings After Re-Configuring to WPA/WPA2 Personal (PSK)
1. Set the Security Mode
AT-TQ
2403# set interface wlan0 security wpa-personal