Filter
Top Products
AT-TQ2403 Management Software User's Guide 255
AT-TQ240
3# remove mac-acl default mac 00:01:02:03:04:04
4. Getting Current MAC Filtering Settings
Get the Type of MAC Filtering List Currently Set
(Accept or Deny)
The following command shows which type of MAC filtering list is currently configured:
AT-TQ2403# get bss wlan0bssInternal mac-acl-mode
deny-list
Get MAC Filtering List
The following command shows the clients on the MAC filtering list:
AT-TQ2403# get mac-acl
name mac
--------------------------
default 00:01:02:03:04:05
default 00:01:02:03:04:06
default 00:01:02:03:04:07
default 00:01:02:03:04:08
Load Balancing
Note: Before configuring this feature, make sure yo
u are familiar with the names of the
interfaces as described in “Understanding Interfaces as Presented in the CLI
”. The
interface name you reference in a command determines whether a setting applies to a
wired or wireless interface, the Internal or Guest network, or (on a dual-radio AP) to
radio "one" or radio "two".
Load balancing parameters affect the distribution of wireless client connections across multiple access
points. Using load balancing, you can prevent scenarios where a single access point in your network
shows performance degradation because it is handling a disproportionate share of the wireless traffic.
(For a detailed conceptual overview of Load Balancing, see “Load Balancing
”.)
The AP provides default settings for load balancing.
The following command examples reconfigure some load balancing settings and get details on the
configuration:
AT-TQ2403# set radio wlan0 load-balance-disassociation-station 2
AT-TQ2403# get radio wlan0 load-balance-disassociation-station
2
AT-TQ2403# set radio wlan0 load-balance-disassociation-utilization 25
AT-TQ2403# get radio wlan0 load-balance-disassociation-station
25
AT-TQ2403# set radio wlan0 load-balance-no-association-utilization 50
AT-TQ2403# get radio wlan0 load-balance-no-association-utilization
50