Filter
Top Products
204 AT-TQ2403 - Management Software - User's Guide
cluster-name vicky-cluster
Determine only whether an AP is clustered or not
The get cluster clustered command returns a value of 0 or 1. If the command returns a value of 1, then
the AP is a member of a cluster. If the AP returns a value of 0, then the AP is in standalone mode.
AT-TQ2403# get cluster clustered
1
Determine the name of the cluster your AP is part of
The get cluster cluster-name command tells you the name of the cluster your AP is part of. In the
following example, the name of the cluster your AP is joined to is "vicky-cluster".
AT-TQ2403# get cluster cluster-name
vicky-cluster
Determine the location of the AP that is part of the cluster
If you have specified a location for the AP, you can determine this using the get cluster location
command.
AT-TQ2403# get cluster location
Vicky’s Office
User Accounts
The following command examples show configuration tasks related to user accounts. These tasks
correspond to the User Management tab in the Web UI.
This table shows a quick view of User Management commands and provides links to detailed examples.
Feature or Setting CLI Command
Get All User Accounts To view all usernames:
get radius-user all name
To view all user account details:
get radius-user all
Add Users: add radius-user UserName
For example:
add radius-user samantha