Filter
Top Products
AT-TQ2403 Management Software User's Guide 229
Feature or Setting CLI Command
Get Detailed Description of Current
Security
get bss wlan0bssInternal detail
g
et interface wlan0 detail
Set the Broadcast SSID (Allow or
Prohibit)
set bss wlan0bssInternal ignore-broadcast-ssid on
set bss wlan0bssInternal ignore-broadcast-ssid off
Enable / Disable Station Isolation AT-TQ2403# set radio wlan0 station-isolation on
AT-TQ2403# set radio wlan0 station-isolation off
Set Security to Plain Text set interface wlan0 security plain-text
Set Security to Static WEP See de
t
ailed example in “Set Security to Static WEP”
Set Security to IEEE 802.1x See detailed example in “Set Security to IEEE 802.1x”.
Set Security to WPA/WPA2 Personal
(PSK)
See detailed example in “Set Security to WPA/WPA2 Personal
(PSK)”
Set Security to WPA/WPA2
Enterprise
See detailed example in “Set Security to WPA/WPA2 Enterprise
(RADIUS)”
Get the Current Security Mode
AT-TQ2403# get interface wlan0 security
plain-text
Get Detailed Description of Current Security Settings
AT-TQ2403# get bss wlan0bssInternal detail
Property Value
---------------------------------------------
status up
description Internal
radio wlan0
beacon-interface wlan0
mac 00:01:02:03:02:00
dtim-period 2
max-stations 2007
ignore-broadcast-ssid off
mac-acl-mode deny-list
mac-acl-name default
radius-accounting off
radius-ip 127.0.0.1
radius-key secret
radius-port 1812
radius-accounting-port 1813
vlan-tagged-interface br0
open-system-authentication on
shared-key-authentication off
wpa-allow-non-wpa-stations off
wpa-cipher-tkip on