Filter
Top Products
252 AT-TQ2403 - Management Software - User's Guide
AT-TQ2403# get basic-rate
name rate
-------------------------
wlan1 5.5
wlan1 2
wlan1 1
wlan0 24
wlan0 12
wlan0 6
wlan0 48
The following command adds "9" as a supported rate to wlan0 (the internal, wireless interface):
AT-TQ2403# add supported-rate wlan0 rate 9
To get the supported rates currently configured for this AP (using "wlan0" as the interface for this
example):
AT-TQ2403# get supported-rate wlan0
rate
----
54
48
36
24
18
12
9
6
The following command removes "12" as a supported rate to wlan0:
AT-TQ2403# remove supported-rate wlan0 rate 12
The following command shows that "12" has been removed as a supported rate to wlan0 and displays the
currently configured rates for this AP:
AT-TQ2403# get supported-rate wlan0
rate
----
54
48
36
24
18
9
6
7. Set the Beacon Interval
The fo
llowing command sets the beacon interval to 80.
AT-TQ2403# set radio wlan0 beacon-interval 80
8. Set the DTIM Period
The De
livery Traffic Information Map (DTIM) period indicates how often wireless clients should check
to see if they have buffered data on the AP awaiting pickup. The DTIM beacon alerts the clients that