Filter
Top Products
210 AT-TQ2403 - Management Software - User's Guide
Get the Network Name (SSID) for the Wireless Internal Interface
The following example shows how to get the SSID of a Wireless Internal Interface. You can see from the
value that is returned, that the SSID of this AP is "allied ".
AT-TQ2403# get interface wlan0 ssid
allied
Get current Wireless (Radio) Settings
The following examples show how to use the CLI to get wireless radio settings on an access point, such
as mode, channel, and so on. You can see by the output results of the commands that the AP mode is set
to IEEE 802.11g, the channel is set to 6, the beacon interval is 100, and so forth.
For information on how to configure Radio settings through the CLI, see “Radio Settings
”.
(Radio settings are fully described in the Web UI topic on “Configuring Radio Settings
”.)
Get the Current IEEE 802.11 Radio Mode
AT-TQ2403# get radio wlan0 mode
a
Get the Channel the AP is Currently Using
AT-TQ2403# get radio wlan0 channel
36
Get Common Radio Settings for the First Radio
AT-TQ2403# get radio wlan0
Property Value
---------------------------------
status up
mac 00:01:02:03:02:00
channel-policy static
mode a
static-channel 36
channel 36
tx-rx-status up
Get All Radio Settings on the First Radio
AT-TQ2403# get radio wlan0 detail
Property Value
---------------------------------------------------------------------------------
status up
description Radio 1 - IEEE 802.11a
mac 00:01:02:03:02:00
max-bss 16
channel-policy static
mode a
dot11h on
radar-detection on
block-time 30
quiet-duration 0
quiet-period 0
tx-mitigation 3