Filter
Top Products
160 AT-TQ2403 - Management Software - User's Guide
1. Configure the following settings on the Association tab on the Network Properties dialog.
Association Tab
Field Setting
Network Authentication Open
Data Encryption WEP
Note: An RC4 stream cipher is used to encrypt the frame body and
cyclic redundancy checking (CRC) of each IEEE 802.11 frame. This is
the same encryption algorithm as is used for Static WEP; therefore,
the data encryption method configured on the client for this mode is
WEP.
This key is provided for me
automatically
Enable (click to check) this option.
2. Configure this setting on the Authentication tab.
Authentication Tab
Field Setting
EAP Tye Choose "Protected EAP (PEAP)".
3. Click Properties to bring up the Protected EAP Properties dialog and configure the following
settings.
Authentication Tab
Field Setting
Validate Server
Certificate
Disable this option (click to uncheck the box).
Note: This example assumes you are using the Built-in Authentication
server on the AP. If you are setting up EAP/PEAP on a client of an AP that
is using an external RADIUS server, you might certificate validation and
choose a certificate, depending on your infrastructure.
Select Authentication
Method
Choose "Secured password (EAP-MSCHAP v2)"
4. Click Configure to bring up the EAP MSCHAP v2 Properties dialog.
On this dialog, disable (click to uncheck) the option to "Automatically use my Windows login name
. . ." etc.
Click OK on all dialogs (starting with the EAP MSCHAP v2 Properties dialog) to close and save
your changes.