Filter
Top Products
AT-TQ2403 Management Software User's Guide 107
Chapter 15: Configuring Radio Settings
The following sections describe how to configure Radio Settings on the AT-TQ2403 Management
Software:
Understanding Radio Settings
Navigating to Radio Settings
Updating Settings
Understanding Radio Settings
Radio settings directly control the behavior of the radio device in the access point and its interaction
with the physical medium; that is, how/what type of electromagnetic waves the AP emits. You can specify
whether the radio is on or off, radio frequency (RF) broadcast channel, beacon interval (amount of time
between AP beacon transmissions), transmit power, IEEE 802.11 mode in which the radio operates, and
so on.
The AT-TQ2403 Management Software comes configured as a dual band access point. The access point
is capable of broadcasting in the following modes:
IEEE 802.11b mode
IEEE 802.11g mode
IEEE 802.11a mode
Atheros Turbo 5 GHz
Atheros Dynamic Turbo 5 GHz
Atheros Turbo 2.4 GHz
Atheros Dynamic Turbo 2.4 GHz
Extended Range
The IEEE mode along with other radio settings are configured as described in “Navigating to Radio
Settings” and “Configuring Radio Settings”.
Navigating to Radio Settings
To specify radio settings, navigate to Manage > Radio tab, and update the fields as described below.