Filter
Top Products
AT-TQ2403 Management Software User's Guide 115
For the G
uest interface, MAC Filtering settings apply to both BSSes.
MAC Filtering settings apply to both radios.
Note: Only 1024 MAC addresses are allowed.
Field Description
Filter To set the MAC Address Filter, click one of the following radio buttons:
Allow only stations in the list
Block all stations in list
Stations List To add a MAC Address to Stations List, enter its 48-bit MAC address into the
lower text boxes, then click Add.
The MAC Address is added to the Stations List.
To remove a MAC Address from the Stations List, select its 48-bit MAC address,
then click Remove.
The stations in the list will either be allowed or prevented from accessing the AP
based on how you set the Filter.
Updating Settings
To update MAC settings:
1. Navigate to the MAC Filtering tab page.
2. Configure the MAC settings as required.
3. Click the Update button to apply the changes.