Filter
Top Products
AT-TQ2403 Management Software User's Guide 245
Th
is table shows a quick view of Radio Settings commands and links to detailed examples.
Feature or Setting CLI Command
Get Radio Settings get radio
get radio wlan0
get radio wlan0 detail
Get IEEE 802.11 Radio Mode get radio wlan0 mode
Get Radio Channel get radio wlan0 channel
Get Basic Radio Settings get radio wlan0
Get All Radio Settings get radio wlan0 detail
Get Supported Rate Set get supported-rate
Get Basic Rate Set get basic-rate
Configure Radio Settings See detailed examples in:
“1. Turn the Radio On or Off”
“2. Set the Radio Mode”
“3. Enable or Disable Super AG”
“4. Set the Channel Policy”
“5. Set the Radio Channel”
“6. Configure Basic and Supported Rate Sets”
“7. Set the Beacon Interval”
“8. Set the DTIM Period”
“9. Set the Fragmentation Threshold”
“10. Set the RTS Threshold”
Get IEEE 802.11 Radio Mode
To get the current setting for radio Mode:
AT-TQ2403# get radio wlan0 mode
a
(The radio in our example is using IEEE 802.11a mode.)