Filter
Top Products
66 AT-TQ2403 - Management Software - User's Guide
Field Description
Transfer Key
Index
Select a key index from the drop-down menu. Key indexes 1 through 4 are available.
The default is 1.
The Transfer Key Index indicates which
W
EP key the access point will use to encrypt
the data it transmits.
Key Length Specify the length of the key by clicking one of the radio buttons:
64 bits
128 bits
152 bits
Key Type Select the key type by clicking one of the radio buttons:
ASCII
Hex
WEP Keys You can specify up to four WEP keys. In each text box, enter a string of characters
for each key.
If you selected ASCII, enter any combination ASCII characters. If you selected
HEX, enter hexadecimal digits (any combination of 0-9 and a-f or A-F). Use the same
number of characters for each key as specified in the "Characters Required" field.
These are the RC4 WEP keys shared with the stations using the access point. Each
client station must be configured to use one of these same WEP keys in the same slot
as specified here on the AP. (See “Rules to Remember for Static WEP
”.)
Characters Required: 26
indicates the number of characters required in the WEP
key. The number of characters required updates automaticall
y
based on how you set
Key Length and Key Type.