Filter
Top Products
AT-TQ2403 Management Software User's Guide 113
Field Description
Rate Sets Check the transmission rate sets you want the access point to support and the
basic rate sets you want the access point to advertise.
Rates are expressed in megabits per second.
Supported Rate Sets indicate rates that the access point supports. You can
check multiple rates (click a checkbox to select or de-select a rate). The AP will
automatically choose the most efficient rate based on factors like error rates
and distance of client stations from the AP.
Basic Rate Sets indicate rates that the access point will advertise to the
network for the purposes of setting up communication with other APs and
client stations on the network. It is generally more efficient to have an AP
broadcast a subset of its supported rate sets.
To support both "b" and "g" clients, change the radio
Mode
to IEEE 802.11g. The
Web UI will automatically select the default Rate Sets that allow both "b" and
"g" clients to connect.
To support only "g" clients, change the radio
Mode
to IEEE 802.11g. The Web
UI will automatically select the default Rate Sets. Now add 24, 12, and 6 as Basic
Rates. This will prevent "b" clients from connecting since they do not support
these rates, but will allow "g" clients to connect since they are required by the
standard to support these rates.
For more information, see description of "
Mode
" above in this table.
Updating Settings
To update Radio settings:
1. Navigate to the Radio tab page.
2. Configure the radio settings as required.
3. Click the Update button to apply the changes.
Note: Keep in mind that only displayed settings will be applied to selected radio when you
click Update. Please config
ure each radio one by one, and be sure to click Update to
submit your setting.