Allied Telesis AT-TQ2403 Network Card User Manual


 
AT-TQ2403 Management Software User's Guide 209
Get Current Settings for the Ethernet (Wired) Management Interface
The following example shows how to use the CLI to get the Ethernet (Wired) settings for the
Management interface for an access point. You can see by the output results of the command that the
MAC address is 00:01:02:03:02:00, the IP address is 192.168.1.230 and the subnet mask is 255.255.255.0.
Get All Wired Settings for the Wired Management Interface
The following command returns all information about wired settings for the Wired Management
Interface.
AT-TQ2403# get management
Property Value
---------------------------------------------------------------------------
vlan-id
interface br0
static-ip 192.168.1.230
static-mask 255.255.255.0
ip 192.168.1.230
mask 255.255.255.0
mac 00:01:02:03:02:00
dhcp-status down
management-ip-enabled 0
management-ip-address 192.168.1.1
deny-wlan-management-enabled 0
deny-wlan-management-ping 0
deny-wlan-management-telnet 0
deny-wlan-management-http 0
deny-wlan-management-snmp 0
Get Current Settings for the Ethernet (Wired) Guest Interface
The following example shows how to use the CLI to get the Ethernet (Wired) settings for the Guest
interface for an access point. You can see by the output results of the command that the MAC address
is 00:50:04:6f:6f:90, the IP address is 10.10.56.248, and the subnet mask is 255.255.255.0.
AT-TQ2403# get interface brguest
Property Value
-----------------------------------------
type bridge
status down
mac 00:00:00:00:00:00
ip
mask
Note: You can get specifics on the Guest interface by using the same types of commands
as f
or the Internal interface but substituting wlan0guest for wlan0. For example, to get
the SSID for the guest interface: get interface wlan0guest ssid.
Get the MAC Address for the Wireless Internal Interface
The following example shows how to get the MAC address of a Wireless Internal Interface. You can see
from the value that is returned, that the MAC address is 02:0C:41:00:02:00.
AT-TQ2403# get interface wlan0 mac
00:01:02:03:02:00