Filter
Top Products
140 AT-TQ2403 - Management Software - User's Guide
C
ategory MIB
Le
vel of Su
pport
Standard IEEE MIB Bridge-MIB Partial, read-only support including root
bridge
We do not implement the optional
StaticTable.
- dot1dStatic
- dot1dPortPair
The following OIDs are not implemented:
- dot1dSr (Because TQ2403 does not
support routing function)
Standard IETF MIB RFC1213-MIB (MIB-II) Partial support, read-only
Navigating to SNMP Settings
To configure SNMP settings, navigate to Services > SNMP, and update the fields as described below.
Figure 53: SNMP Setting Page
Configuring SNMP Settings
Start/stop control of SNMP agents, community password configuration, access to MIBs, and
configuration of SNMP Trap destinations is provided through the AT-TQ2403 Management Software as
described below.