Filter
Top Products
56 AT-TQ2403 - Management Software - User's Guide
Field Description
Channel Shows the channel on which the access point is currently broadcasting.
The Channel defines the portion of the radio spectrum that the radio uses for
transmitting and receiving.
The channel is set in Manage > Radio. (See “Configuring Radio Settings
”.)
Rate Shows the rate (in megabits per second) at which this access point is currently
transmitting.
The current rate will always be one of the rates shown in Supported Rates.
Signal Indicates the strength of the radio signal emitting from this access point as
measured in decibels (dB).
Beacon Interval Shows the Beacon interval being used by this access point.
Beacon frames are transmitted by an access point at regular intervals to
announce the existence of the wireless network. The default behavior is to
send a beacon frame once every 100 milliseconds (or 10 per second).
The Beacon Interval is set on Manage > Radio. (See “Configuring Radio
Settings”)
Beacon Age Shows the date and time of the most recent beacon that was transmitted from
the access point.