Filter
Top Products
AT-TQ2403 Management Software User's Guide 233
Feature or Setting CLI Command
To set Authentication Algorithm
to Both:
set bss wlan0bssInternal open-system-authentication on
set bss wlan0bssInternal shared-key-authentication on
For this example, we’ll set the authentication algorithm to Shared Key:
AT-TQ2403# set bss wlan0bssInternal shared-key-authentication on
AT-TQ2403# set bss wlan0bssInternal open-system-authentication off
7. Get Current Security Settings After Re-Configuring to Static WEP Security Mode
Now we can use the "get" co
mmand again to view the updated security configuration and see the results
of our new settings.
The following command gets the security mode in use on the Internal network:
AT-TQ2403# get interface wlan0 security
static-wep
The following command gets details on how the internal network is configured, including details on
Security.
AT-TQ2403# get bss wlan0bssInternal detail
Property Value
---------------------------------------------------------------------------
status up
description Internal
radio wlan0
beacon-interface wlan0
mac 00:01:02:03:02:00
dtim-period 2
max-stations 2007
ignore-broadcast-ssid off
mac-acl-mode deny-list
mac-acl-name default
radius-accounting off
radius-ip 127.0.0.1
radius-key secret
radius-port 1812
radius-accounting-port 1813
vlan-tagged-interface br0
open-system-authentication off
shared-key-authentication on
wpa-allow-non-wpa-stations off
wpa-cipher-tkip on
wpa-cipher-ccmp off
wpa-allowed on
wpa2-allowed on
rsn-preauthentication off
The following command gets details on the interface and shows the WEP Key settings, specifically.
AT-TQ2403# get interface wlan0 detail
Property Value
-----------------------------------------------------------------------------
type service-set