Filter
Top Products
30 AT-TQ2403 - Management Software - User's Guide
Update Basic Settings
Figure 9: Basic Settings Page Step 3
Whe
n you have reviewed the new configuration, click Update to apply the settings and deploy the
access points as a wireless network.
Basic Settings for a Standalone Access Point
The Basic Settings tab for a standalone access point indicates only that the current mode is standalone. If
you want to add the current access point to an existing cluster, navigate to the Cluster > Access Point
tab.
For more information see “Starting Clustering
”.
Setting User Interface Scheme Preferences
Figure 10: Web User Interface Setting
A
design panel appears at the top of every AP Configuration screen enabling you to configure the
appearance of every web page. You can change the layout of tabs on pages by choosing between three
navigation settings.
Navigation
You use the options available in the navigation drop down list to change the layout of the tab options on
your screen.
Option Description
Horizontal Tabs Select this option to display all tabs horizontally across the top of the page.
Vertical Tabs Select this option to display all tabs vertically on the left side of your page.
Drop Down Menu Select this option to display all tabs horizontally across the top of the page.
Any sub categories will be displayed as a drop down menu beneath the main
tab.