Filter
Top Products
70 AT-TQ2403 - Management Software - User's Guide
If you selected IEEE 802.1x Security Mode, provide the following:
Figure 28: Security Setting Page – IEE
E802.1x Setting Page
Field Description
Use internal radius
server
You can choose whether to use the built-in authentication server provided with
the AT-TQ2403 Management Software, or you can use an external radius
server.
To use the authentication server provided with the AT-TQ2403
Management Software, ensure the checkbox beside the Use internal
radius server field is selected. If this option is selected, you do not have to
provide the Radius IP and Radius Key; they are automatically provided. If the
option for the internal RADIUS server is enabled, configure user accounts on
the AP via the User Management tab. For more information, see
“Managing User Accounts
”.
To use an external authentication server, ensure the checkbox beside the
Use internal radius server field is deselected. If you deselect this
checkbox you must supply a Radius IP and Radius Key of the server you
want to use.
Note: The RADIUS server is
identified by its IP address and UDP port numbers
for the different services it provides. On the current release of the AT-TQ2403
Manageme
nt Software, the RADIUS server User Datagram Protocol (UDP)
ports used b
y the access point are not configurable. (The AT-TQ2403
Manageme
nt Software is hard-coded to use RADIUS server UDP port 1812 for
authe
ntication and port 1813 for accounting.)