Filter
Top Products
Configuring Ports
This chapter describes how to configure ports on the Intel
®
NetStructure
™
480T routing switch and covers these topics:
• Configuring Ports
• Changing Port Speed and Duplex Settings
• Jumbo Frames
• Load Sharing
• Jumbo Frames
• Port-Mirroring
• Enterprise Discovery Protocol
Configuring Ports
By default, all ports are enabled. To enable or disable one or more ports,
use this command:
[enable | disable] ports <portlist>
For example, to disable ports 3, 5, and 12 through 15 on the switch, enter
this:
disable port 3,5,12-15
Even though a port is disabled, the link remains enabled for diagnostic
purposes.
6