Filter
Top Products
62
Intel
®
NetStructure™ 480T Routing Switch User Guide
When you access the home page of the switch the Logon screen
appears.
Controlling Web Access
By default, Web access is enabled on the routing switch. You can
restrict access through the Web Device Manager using an access
profile, which permits or denies access to a named list of IP
addresses and subnet masks.
For more information on
assigning an IP address,
refer to "Configuring
Switch IP Parameters" on
page 55.
You can configure Web access to use an access profile using this
command:
enable web {access-profile <access-profile> | none}
{port <tcp_port_number>}
Use the none option to remove a previously configured access
profile.
To display the status of Web access, use this command:
show management
To disable Web access, use this command:
disable web
To re-enable Web access, use this command:
enable web {access-profile <access-profile> | none}
{port <tcp_port_number>}
When you disable or enable Web Device Manager, you must reboot
the switch for the changes to take effect. Apply an access profile
only when Web Device Manager is enabled.
Simple Network Management
Protocol (SNMP)
Any network manager running the Simple Network Management
Protocol (SNMP) can manage the 480T routing switch, provided
the Management Information Base (MIB) feature of the 480T
routing switch is installed correctly on the management station.
Each Network Manager provides its own user interface to the
management facilities.