Filter
Top Products
C H A P T E R 13 RIP and OSPF
233
Figure 13.3: Route redistribution
Configuring Route Redistribution
Exporting routes from OSPF to RIP, and from RIP to OSPF, are
discrete configuration functions. To run OSPF and RIP
simultaneously, first configure both protocols, and then verify the
independent operation of each. Then you can configure the routes to
export from OSPF to RIP and from RIP to OSPF.
Redistributing Routes into OSPF
Use these commands to enable or disable the exporting of RIP
learned, static, and direct routes to OSPF:
enable ospf export [static | direct | ospf | vip]
cost <metric> {tag <number>}
disable ospf export [static | direct | ospf | vip]
480t_015
OSPF AS
Backbone Area
0.0.0.0
Area
121.2.3.4
ABR
ASBR ASBR
RIP AS
®
®
®