Filter
Top Products
166
Intel
®
NetStructure™ 480T Routing Switch User Guide
To add rate-shaped ports to the VLAN, use the following command:
configure vlan <vlan name> add port <portlist>
{tagged | untagged} {nobroadcast} soft-rate-limit
To delete rate-shaped ports from the VLAN, use the command:
configure vlan <vlan name> delete port <portlist>
To configure the rate-shaping parameters of the loopback port, use
the normal QoS profile configuration command, as follows:
configure qosprofile <qosprofile> {minbw <pcnt>}
{maxbw <pcnt>} priority <level> {buffer <pcnt>}
{<portlist>} <loopback port number>
To display the bi-directional rate shaping configuration, use the
command:
show vlan {<vlan name> | detail}
This command designates rate-shaped ports with an R and loopback
ports with an L next to the port number.
To set the port speed of a loopback port, use the normal port
configuration command, as follows:
configure ports <portlist> auto off {speed [ 100 |
1000]} duplex [half | full]