Filter
Top Products
12
Intel
®
NetStructure™ 480T Routing Switch User Guide
Software Factory Defaults
Table 1.2 lists factory defaults for global features.
Table 1.2: Global Factory Defaults
Item Default Setting
Serial or Telnet user account admin with no password and user with no password
Web network management Enabled
Telnet Enabled
SNMP access Enabled
SNMP read community string
public
SNMP write community string
private
RMON Enabled
BOOTP Enabled on the default VLAN
Quality of Service (QoS) Disabled. If enabled, all traffic is part of the default queue
QoS monitoring Automatic roving
802.1p priority Recognition enabled
802.3x flow control Enabled on 1000 Mbps Ethernet ports
CLI idle timeout Enabled (15 minutes)
Virtual LANs Three VLANs pre-defined. VLAN named default
contains all ports and belongs to the STPD named s0.
VLAN mgmt operates on the 10/100 Ethernet
management port. The management port is DTE only,
and is not capable of switching or routing.
VLAN MacVLanDiscover is active only when using
MAC VLAN.