Filter
Top Products
88
C H A P T E R 6 Intel
®
NetStructure™ 480T Routing Switch User Guide
disable ports <portlist> Disables a port. Even when disabled, the link is
available for diagnostic purposes.
disable sharing <port> Disables a load-sharing group of ports.
enable jumbo-frame ports [<portlist> | all] Enables reception and transmission of jumbo
frames. A jumbo frame is dropped:
• if it is received on a port with jumbo frames
disabled, or
• if the jumbo frame needs to be forwarded
out of a port that has jumbo frames
disabled.
enable learning ports <portlist> Enables MAC address learning on one or more
ports. The default setting is enabled.
enable ports [<portlist> | all] Enables a port.
enable sharing <port> grouping <portlist>
{algorithm [port-based | address-based |
round-robin]}
Defines a load-sharing group of ports. The ports
specified in <
portlist> are grouped to the
master port. Optional load-sharing algorithms
include:
•
port-based—Uses the ingress port as
criteria for egress port selection.
•
address-based—Uses addressing
information as criteria for egress port
selection.
•
round-robin—Forwards packets to all
egress ports in a round-robin fashion.
If not specified, port-based load sharing is used.
restart ports {<portlist> | mgmt} Resets auto-negotiation for one or more ports by
resetting the physical link.
show ports {<portlist> | mgmt} collisions Displays real-time collision statistics.
Table 6.1: Port Commands (continued)
Command Description