Filter
Top Products
234
Intel
®
NetStructure™ 480T Routing Switch User Guide
These commands enable or disable the exporting of RIP, static, and
direct routes by way of LSAs to other OSPF routers as Autonomous
System (AS)-external type 1 or type 2 routes. The default setting is
disabled.
The cost metric is inserted for all RIP-learned, static, and direct
routes injected into OSPF. If the cost metric is set to 0, the cost is in-
serted from the route. The tag value is used only by special routing
applications. Use the number 0 if you do not have specific require-
ments for using a tag. The tag value in this instance has no relation-
ship with 802.1Q VLAN tagging.
Enable or disable the export of Virtual IP addresses to other OSPF
routers, using these commands:
enable ospf export vip cost <metric> [ase-type-1 |
ase-type-2] {tag <number>}
disable ospf export vip
Verify the configuration using the command:
show ospf
Redistributing Routes into RIP
Enable or disable the exporting of static, direct, and OSPF-learned
routes into the RIP domain, using these commands:
enable rip export [static | direct | ospf | ospf-
intra | ospf-inter | ospf-extern1 | ospf-extern2 |
vip] cost <metric> tag <number>}
disable rip export [static | direct | ospf | ospf-
intra | ospf-inter | ospf-extern1 | ospf-extern2 |
vip]
These commands enable or disable the exporting of static, direct, and
OSPF-learned routes into the RIP domain. You can choose which
types of OSPF routes are injected, or you can simply choose
ospf,
which will inject all learned OSPF routes regardless of type. The
default setting is disabled.