Filter
Top Products
C H A P T E R 17 Access Policies
343
You can apply the changes on the NLRI information that had been
exchanged before the policy changes, by issuing a soft reset on the
ingress or egress side, depending on the changes.
For soft resets to be applied on the ingress side, the changes must be
previously enabled on the neighbor.
Changes to the route maps associated with network aggregation or
redistribution commands become effective after a maximum
interval of 30 seconds. You can immediately apply them by using
the soft reconfiguration command.
Route Maps in BGP
Route maps are used in BGP to modify or filter NLRI information
exchanged with neighbors. They are also used in NLRI information
that originates through network command, aggregation, or
redistribution.
Route Map Commands
Table 17.6 describes route map commands. For further command
options, press the Tab key in the command line interface.