Filter
Top Products
C H A P T E R 12 IP Unicast Routing
213
configure iparp timeout <minutes> Configures the IP ARP timeout period.
The default setting is 20 minutes. A
setting of 0 disables ARP aging. The
maximum aging time is 32 minutes.
configure tcp-sync-rate
<number_sync_per_sec>
Configures a limit for the switch to
process TCP connection requests. If the
connection request rate is higher than
the specified rate, or the total number
of outstanding connection requests
exceeds the system limit, the system
ages out incomplete connection
requests at a faster rate. The range is 5
to 200,000. The default setting is 25
connection requests per second.
disable bootp vlan [<name> | all] Disables the generation and processing
of BOOTP packets.
disable bootprelay Disables the forwarding of BOOTP
requests.
disable ipforwarding {vlan <name>} Disables routing for one or all VLANs.
disable ipforwarding broadcast {vlan <name>} Disables routing of broadcasts to other
networks.
disable loopback-mode vlan [<name>] Disables loopback mode on an
interface.
disable multinetting Disables IP multinetting on the system.
enable bootp vlan [<name> | all] Enables the generation and processing
of BOOTP packets on a VLAN to
obtain an IP address for the VLAN
from a BOOTP server. The default
setting is enabled for all VLANs.
Table 12.4: Basic IP Commands (continued)
Command Description