Filter
Top Products
284
Intel
®
NetStructure™ 480T Routing Switch User Guide
configure dvmrp vlan <name> timer
<probe_interval> <neighbor timeout>
Configures DVMRP interface timers. Specify:
•
probe_interval—How many seconds the
system waits between transmitting DVMRP
probe messages. The range is 1 to
2,147,483,647 seconds (68 years). The default
setting is 10.
•
neighbor_timeout_interval—The
amount of time before a DVMRP neighbor
route is declared to be down. The range is 1 to
2,147,483,647 seconds (68 years). The default
setting is 35.
configure pim add vlan [<vlan> | all]
{dense | sparse}
Enables PIM on an IP interface. When an IP
interface is created, per-interface PIM
configuration is disabled by default. The default
PIM mode is dense.
configure pim cbsr [vlan <name> priority
<priority> | none]
Configures a candidate bootstrap router for PIM
sparse-mode operation. The range is 0 - 255. The
default setting is 0 and indicates the lowest
priority. To delete a Candidate Bootstrap Router
(CBSR), use the keyword
none as the priority.
Table 15.2: IP Multicast Routing Configuration Commands (continued)
Command Description