Filter
Top Products
414
Intel
®
NetStructure™ 480T Routing Switch User Guide
RMON
Using the Remote Monitoring (RMON) capabilities of the 480T
routing switch allows network administrators to improve system
efficiency and reduce the load on the network.
This sections explain more about the RMON concept and the
RMON features supported by the switch.
RMON is the common abbreviation for the Remote Monitoring
Management Information Base (MIB) system defined by the
Internet Engineering Task Force (IETF) documents RFC 1271 and
RFC 1757. You can use RMON to monitor LANs remotely.
disable log display Disables the log display.
disable syslog Disables logging to a remote syslog host.
enable cli-config-logging Enables the logging of CLI configuration
commands to the Syslog for auditing
purposes. The default setting is enabled.
enable log display Enables the log display.
enable syslog Enables logging to a remote syslog host.
show log config Displays the log configuration, including the
syslog host IP address, the priority level of
messages being logged locally, and the
priority level of messages being sent to the
syslog host.
show log {<priority>} Displays the current snapshot of the log.
Priority filters the log to display messages
with the selected or higher (more critical)
priority. Priorities is one of Critical,
Emergency, Error, Alert, Warning, Notice,
Info, or Debug. If not specified, info and
higher priority messages display.
Table 19.5:Logging Commands (continued)
Command Description