Filter
Top Products
232
Intel
®
NetStructure™ 480T Routing Switch User Guide
To reconfigure an OSPF interface as a normal interface:
configure ospf add vlan <vlan name> area <area
identifier>
To display passive interface configuration:
show ospf interfaces [detail]
Routing with OSPF
Set the RouterID
We recommend manually setting the routerID of the switches
participating in OSPF instead of having the switch automatically
choose its routerID based on the highest interface IP address.
Not performing this configuration in larger, dynamic environments
could result in an older link state database being used. The command
is:
configure ospf routerid <address>
The address is provided in dotted decimal notation. Each switch must
have a unique routerID.
Route Redistribution
Both RIP and OSPF can be enabled simultaneously on the 480T
routing switch. Route redistribution allows the switch to exchange
routes, including static routes, between the two routing protocols.
Figure 13.3 shows an example of route redistribution between an
OSPF autonomous system and a RIP autonomous system.