Filter
Top Products
150
Intel
®
NetStructure™ 480T Routing Switch User Guide
that is used when transmitting the packet. To replace 802.1p priority
information, use the command:
enable dot1p replacement ports [<portlist> | all]
802.1p priority information is replaced according to the hardware
queue that is used when transmitting from the switch. The mapping
is described in Table 10.7. This mapping cannot be changed.
802.1p Commands
Table 10.8 shows the commands used to configure 802.1p priority.
For further command options, press the Tab key in the command
line interface.
Table 10.7: 802.1p Priority Value-to-Hardware Queue
Mapping
Hardware Queue 802.1p Priority Value
Q0 0
Q1 1
Q2 2
Q3 3
Q4 4
Q5 5
Q6 6
Q7 7
Table 10.8: 802.1p Configuration Commands
Command Description
configure dot1p ethertype <dot1p_priority> Configures the default QoS profile to 802.1p
priority mapping. The value for dot1p_priority
is an integer between 0 and 7.