Filter
Top Products
412
Intel
®
NetStructure™ 480T Routing Switch User Guide
The priorities are the same as for local logging.
If not specified, only critical priority messages are sent to the syslog
host.
Logging Configuration Changes
The local management software allows you to record all configura-
tion changes (and their sources) made through the CLI using Telnet
or the local console. The changes are logged to the system log.
Each log entry includes the user account name that performed the
change and the source IP address of the client (if Telnet was used).
Configuration logging applies only to commands that result in a
configuration change. To enable configuration logging, use this
command:
enable cli-config-logging
To disable configuration logging, use this command:
disable cli-config-logging
CLI configuration logging is enabled by default.
Logging Commands
The commands described in Table 19.5 allow you to configure
logging options, reset the options, display the log, and clear the log.
For further command options, press the Tab key in the command
line interface.
Table 19.5:Logging Commands
Command Description
clear counters Clears all switch statistics and port counters.
clear log {static} Clears the log. If static is specified, the
critical log messages are also cleared.