Filter
Top Products
C H A P T E R 15 IP Multicast Routing
287
Configuration for ABR1
The following is the configuration for the router labeled ABR1:
configure vlan A0_10_0_2 ipaddress 10.0.2.1
255.255.255.0
configure vlan A0_10_0_3 ipaddress 10.0.3.1
255.255.255.0
configure vlan A6_161_48_2 ipaddress 161.48.2.2
255.255.255.0
configure vlan A5_160_26_26 ipaddress 160.26.26.1
255.255.255.0
configure ospf add vlan all
enable ipforwarding
enable ipmcforwarding
configure pim add vlan all sparse
create access-profile rp-list ipaddress
configure rp-list add ipaddress 224.0.0.0 240.0.0.0
enable loopback-mode A0_10_0_3
configure pim crp A0_10_0_3 rp-list 30
configure pim cbsr A0_10_0_3 30
configure pim spt-threshold 16 8
Displaying IP Multicast Routing
Settings
To display settings for IP multicast routing components, use the
commands listed in Table 15.3. For more command options, press the
Tab key in the command line interface.
Table 15.3: IP Multicast Routing Show Commands
Command Description
show dvmrp {vlan <name> | route {detail}} Displays the DVMRP configuration and
statistics, or the unicast route table. The
default setting is all.