Filter
Top Products
Using Web Device
Manager
Web Device Manager is device-management software running in the
Intel
®
NetStructure
™
480T routing switch. It allows you to access the
switch over a TCP/IP network, using a Web browser that supports frames
and JavaScript
§
(such as Netscape Navigator
§
3.0 or later, or Microsoft
Internet Explorer
§
3.0 or later) to manage the system.
Web Device Manager provides a subset of the command-line interface
(CLI) commands available for configuring and monitoring the switch. If
a particular command is not available using Web Device Manager, use the
CLI to access the desired functionality.
To use Web Device Manager, at least one VLAN must be assigned an IP
address.
Enabling and Disabling Web Access
By default, Web access is enabled on the switch. You can restrict the use
of Web access using an access profile.
For information on creating
an access profile see page
324.
An access profile permits or denies a named list of IP addresses and
subnet masks. To configure Web access to use an access profile, use this
command:
enable web access-profile [<access-profile> | none]
{port <tcp_port_number>}
4