Filter
Top Products
272
Intel
®
NetStructure™ 480T Routing Switch User Guide
Resetting and Disabling BGP
To return BGP settings to their defaults, or to disable BGP, use the
commands listed in Table 14.3. For more command options, press
the Tab key in the command line interface.
Table 14.3: BGP Reset and Disable Commands
Command Description
delete bgp neighbor [<ipaddress> | all] Deletes one or all BGP neighbors.
disable bgp Disables BGP.
disable bgp aggregation Disables BGP route-aggregation.
disable bgp always-compare-med Disables MED from being used in the route-
selection algorithm.
disable bgp neighbor [<ipaddress> | all]
{soft-in-reset}
Disables the BGP session. Once disabled, all
the Adjacent Routing Information Base In
(Adj-RIB-in) for the neighbor is flushed out.
disable bgp peer-group <peer group>
{soft-in-reset}
Disables the soft recognition feature of a peer
group and all the neighbors of a peer group.
disable bgp synchronization Disables the synchronization between BGP
and IGP. Default is enabled.
disable bgp export [ospf | ospf-extern |
ospf-extern2 | ospf-inter | ospf-intra]
<routemap>
Disables exporting OSPF routes.