Filter
Top Products
34
Intel
®
NetStructure™ 480T Routing Switch User Guide
Use the none option to remove a configured access profile.
To display the status of Web access, use this command:
show management
To disable Web access, use this command:
disable web
To re-enable Web access, use this command:
enable web {access-profile [<access-profile> |
none]} {port <tcp_port_number>]
Reboot the system for these changes to take effect.
Setting Up Your Browser
Your browser’s default settings should work well with Web Device
Manager. Apply these recommended settings to improve the
display features and functionality of Web Device Manager:
• After downloading a newer version of the switch image, clear the
browser disk and memory cache to see the updated menu screens.
It is important to clear the cache while at the main Logon screen,
so that all underlying .GIF files are updated.
• Check for newer versions of stored pages by setting the
cache options to the “every visit” setting:
• When using Netscape Navigator, configure the cache to
check for changes
Every Time you request a page.
• When using Microsoft Internet Explorer, configure the
Temporary Internet Files to check for newer versions of
stored pages by selecting
Every visit to the page.
• Images must be auto-loaded.
• Use a high-resolution monitor (1024 x 768 recommended) to
maximize the amount of information displayed in the content
frame. You can also use 800 x 600 pixels.
• Maximize viewing space by turning off the browser toolbars.
• Configure the browser to use these recommended fonts:
• Proportional font—Times New Roman
• Fixed-width font—Courier New