Filter
Top Products
C H A P T E R 12 IP Unicast Routing
211
IP Commands
Table 12.4 describes the commands used to configure basic IP
settings. For more command options, press the Tab key in the
command line interface.
configure vlan <name> udp-profile
<profile_name>
Assigns a UDP-forwarding profile to the
source VLAN. Once the UDP profile is
associated with the VLAN, the Intel
®
NetStructure
™
480T routing switch picks
up any broadcast UDP packets that match
the user-configured UDP port number,
and forwards those packets to the user-
defined destination. If the UDP port is
the DHCP/BOOTP port number,
appropriate DHCP/BOOTP proxy
functions are used.
create udp-profile <profile_name> Creates a UDP-forwarding profile. You
must use a unique name for the UDP-
forwarding profile.
delete udp-profile <profile_name> Deletes a UDP-forwarding profile.
show udp-profile {<profile_name>} Displays the profile names, input rules of
the UDP port, destination IP address, or
VLAN and the source VLANs where the
profile is applied.
unconfigure udp-profile vlan [<name> | all] Removes the UDP-forwarding profile
configuration for one or all VLANs.
Table 12.3: UDP-Forwarding Commands (continued)
Command Description