Filter
Top Products
C H A P T E R 15 IP Multicast Routing
283
configure dvmrp timer
<route_report_interval>
<route_replacement_time>
Configures the global DVMRP timers. Specify the
following:
•
route_report_interval—how many
seconds the system waits between
transmitting periodic route report packets. The
range is 1 to 2,147,483,647 seconds (68
years).
The default setting is 60. Because triggered
update is always enabled, the route report will
always be transmitted prior to the expiration
of the route report interval.
•
route_replacement_time—The hold-down
time before a new route is learned, after the
previous route is deleted. The range is 1 to
2,147,483,647 seconds (68 years). The default
setting is 140.
configure dvmrp vlan [<name> | all] cost
<number>
Configures the cost (metric) of the interface. The
default setting is 1.
configure dvmrp vlan [<name> | all]
export-filter [<access_profile> | <none>]
Configures DVMRP to filter out routes specified
in the export filter when sending out route
advertisements.
configure dvmrp vlan [<name> | all]
import-filter [<access_profile> | <none>
Configures DVMRP to filter out certain routes
(defined by the access profile) received from a
neighbor.
configure dvmrp vlan [<name> | all]
trusted-gateway [<access_profile> |
<none>]f
Configures the DVMRP trusted gateway, based on
the access profile.
Table 15.2: IP Multicast Routing Configuration Commands (continued)
Command Description