Filter
Top Products
328
Intel
®
NetStructure™ 480T Routing Switch User Guide
configure rip vlan [<name> | all] import-filter
[<access_profile> | none]
• Export Filter—Use an access profile to determine which RIP
routes are advertised into a particular VLAN, using this
command:
configure rip vlan [<name> | all] export-filter
[<access_profile> | none]
Examples
In the example shown in Figure 17.6, a switch is configured with
three VLANs, Engsvrs, Sales and Backbone. The RIP protocol is
used to communicate with other routers on the network. The
administrator wants to allow internal access to all the VLANs on the
switch, but no access to the router that connects to the Internet. The
remote router that connects to the Internet has a local interface
connected to the corporate backbone. The IP address of the local
interface connected to the corporate backbone is 10.0.0.10/24.
Figure 17.6: RIP access policy example
480t 007
Internet
Backbone (RIP)
SalesEngsvrs
Switch being
configured
10.0.0.10 / 24
10.0.0.11 / 24
10.1.1.1 / 24 10.2.1.1 / 24
10.0.0.12 / 24
Engsvrs
Internet
Sales