Filter
Top Products
C H A P T E R 13 RIP and OSPF
253
Resetting and Disabling OSPF
Settings
To return OSPF settings to their defaults, use the commands listed in
Table 13.7. For more command options, press the Tab key in the
command line interface.
Table 13.7: OSPF Reset and Disable Commands
Command Description
delete ospf area [<areaid> | all] Deletes an OSPF area. Once removed, the
associated OSPF area and interface information
are deleted. Neither a backbone area, nor a non-
empty area can be deleted.
disable ospf Disables OSPF process in the router.
disable ospf export direct Disables exporting of local interface (direct)
routes into the OSPF domain.
disable ospf export rip Disables exporting of RIP routes into the OSPF
domain.
disable ospf export static Disables exporting of statically configured routes
into the OSPF domain.
disable ospf export vip Disables exporting of virtual IP addresses into the
OSPF domain.
disable ospf export [bgp | e-bgp | i-bgp] Disables exporting of BGP, e-BGP, or i-BGP
routes into the OSPF domain.
unconfigure ospf {vlan <name> |
<areaid>}
Resets one or all OSPF interfaces to default
settings.