Filter
Top Products
406
Intel
®
NetStructure™ 480T Routing Switch User Guide
• Received Packet Count (Rx Pkt Count)—The total number of
good packets that were received by the port.
• Received Byte Count (Rx Byte Count)—The total number of
bytes that were received by the port, including bad or lost frames.
This number includes bytes contained in the Frame Check
Sequence (FCS), but excludes bytes in the preamble.
• Received Broadcast (Rx Bcast)—The total number of frames
received by the port that are addressed to a broadcast address.
• Received Multicast (Rx Mcast)—The total number of frames
received by the port that are addressed to a multicast address.
Port Errors
The 480T routing switch tracks errors for each port. To view port
transmit errors, use this command:
show ports <portlist> txerrors
This port transmit error information is collected:
• Port Number
• Link Status—The current status of the link. Options are:
• Ready: the port is ready to accept a link
• Active: the link is present at this port
• Transmit Collisions (Tx Coll)—The total number of collisions
seen by the port, regardless of whether a device connected to the
port participated in any of the collisions.
• Transmit Late Collisions (Tx Late Coll)—The total number of
collisions that occurred after the port’s transmit window expired.
• Transmit Deferred Frames (Tx Deferred)—The total number
of frames that were transmitted by the port after the first
transmission attempt was deferred by other network traffic.
• Transmit Errored Frames (Tx Error)—The total number of
frames that were not completely transmitted by the port because
of network errors (such as late collisions or excessive collisions).
• Transmit Parity Frames (Tx Parity)—The bit summation has a
parity mismatch.