Filter
Top Products
288
Intel
®
NetStructure™ 480T Routing Switch User Guide
Deleting and Resetting IP Multicast
Settings
To return IP multicast routing settings to their defaults and disable
IP multicast routing functions, use the commands listed in
Table 15.4. For more command options, press the Tab key in the
command line interface.
show igmp snooping {vlan <name> | detail} Displays IGMP snooping registration
information, and a summary of all IGMP
timers and states.
show ipmc cache {detail} {<group>}
{<src_ipaddress> <mask>}
Displays the IP multicast forwarding cache.
show pim {vlan <name> | detail} Displays the PIM configuration and
statistics. If no VLAN is specified, the
configuration is displayed for all PIM
interfaces.
show pim rp-set {group} Displays the RP set for one or all groups.
Table 15.3: IP Multicast Routing Show Commands (continued)
Command Description
Table 15.4: IP Multicast Routing Reset and Disable Commands
Command Description
clear igmp snooping {vlan <name>} Removes one or all IGMP snooping entries.
clear ipmc [counters | cache | debug | trace |
dlcs | fdb | igmp | iparp | ipfdb | log | session
| slb] {<group> {<src_ipaddress>
<mask>}}
Resets the IP multicast items. If no options are
specified, all IP multicast entries are flushed.
configure ipmc cache timeout <seconds> Configures the aging time (in seconds) for
multicast cache entries. The default setting is
300.