Filter
Top Products
68
Intel
®
NetStructure™ 480T Routing Switch User Guide
Table 5.9: RADIUS
®
Commands
Command Description
configure radius [primary | secondary] server
[<ipaddress> | <hostname>] {<udp_port>}
client-ip <ipaddress>
Configures the primary and secondary
RADIUS
§
server. Specify the following:
• [primary | secondary]—Either the
primary or secondary RADIUS server.
•
[<ipaddress> | <hostname>]—The IP
address or host name of the server being
configured.
•
<udp_port>—The UDP port to use to
contact the RADIUS server. The default
UDP port setting is 1645.
•
client-ip <ipaddress>—The IP address
used by the switch to identify itself when
communicating with the RADIUS server.
The RADIUS server defined by this command
is used for user-name authentication and CLI
command authentication.
configure radius [primary | secondary]
shared-secret {encrypted} <string>
Configures the authentication string used to
communicate with the RADIUS server.
configure radius-accounting [primary |
secondary] shared-secret {encrypted}
<string>
Configures the authentication string used to
communicate with the RADIUS accounting
server.
disable radius Disables the RADIUS client.
disable radius-accounting Disables RADIUS accounting.