Filter
Top Products
50
Intel
®
NetStructure™ 480T Routing Switch User Guide
4. Enter the new password at the prompt.
5. Re-enter the password for verification.
To add a password to the default user account:
1. Log in to the switch using the name admin.
2. At the password prompt, press Enter, or enter the password that
you have configured for the
admin account.
3. Add a default user password using this command:
configure account user
4. Enter the new password at the prompt.
5. Re-enter the new password at the prompt.
Creating a Management Account
If you forget your
password while logged out
of the command-line
interface, contact your
local technical support
representative.
The 480T routing switch can have a total of 16 management
accounts. You can use the default names (admin and user), or you
can create new names and passwords for the accounts. Account
passwords can be between 0 and 32 characters. Do not use Ctrl +
key or Alt + key.
To create a management account:
1. Log in to the switch as admin.
2. At the password prompt, press Enter, or enter the password that
you have configured for the
admin account.
3. Add a new user account with this command:
create account [admin | user] <username>
4. Enter the password at the prompt.
5. Re-enter the password for verification.
Viewing Accounts
To view the accounts you have created, you must have
administrator privileges. Use this command to see the accounts:
show accounts