Filter
Top Products
292
Intel
®
NetStructure™ 480T Routing Switch User Guide
IPX NetID or an IP address. You also can configure a VLAN for
both IPX and IP routing.
Figure 16.1 shows the same switch discussed earlier in Figure 12.1
on page 191. In Figure 16.1, IPX routing is added to the switch, and
two additional VLANs have been defined—Exec and Support.
Both VLANs have been configured as protocol-specific VLANs,
using IPX.
Figure 16.1: IPX VLAN configuration
Exec is assigned the IPX NetID 2516. Support is assigned the IPX
NetID A2B5. Port 5 is assigned to Exec; Port 7 is assigned to
Support. In addition, port 4 is assigned to Exec. Therefore, port 4
belongs to both the Personnel VLAN (running IP) and the Exec
VLAN (running IPX).
Traffic within each VLAN is switched using the Ethernet MAC
address. Traffic between Exec and Support is routed using the IPX
NetID. Traffic cannot be sent between the IP VLANs (Finance and
Personnel) and the IPX VLANs (Exec and Support).
480t_006
1 2
Finance
192.207.35.0
Personnel
192.207.36.0
Exec
2516
IP IPX
§
192.207.36.14
NetID 2516
MAC 00:AA:BB:CC:DD:EE
NetID 2516
MAC 00:11:22:33:44:55
NetID A2B5
MAC 01:23:45:66:54:32
5 7
Support
A2B5
3 4
®