Filter
Top Products
46
Intel
®
NetStructure™ 480T Routing Switch User Guide
disable clipaging Disables pausing of the screen display when
a
show command output reaches the end of
the page.
disable idletimeout Disables the timer that disconnects all
sessions. Once disabled, console sessions
remain open until the switch is rebooted or
you log off. Telnet sessions remain open until
you close the Telnet client.
disable port [all | mgmt | <portlist>] Disables a port on the switch.
disable telnet Disables Telnet access to the switch.
disable web Disables Web access to the switch.
enable bootp vlan [<name> | all] Enables BOOTP for one or more VLANs.
enable cli-config-logging Enables the logging of CLI configuration
commands to the Syslog for auditing
purposes. The default setting is enabled.
enable clipaging Enables pausing of the screen display when
show command output reaches the end of the
page. The default setting is enabled.
enable idletimeout Enables a timer that disconnects all sessions
(both Telnet and console) after
20 (in
minutes) of inactivity. The default setting is
disabled.
enable license full_L3 <license_key> Enables a particular software feature license.
Specify <
license_key> as an integer.
The command
unconfigure switch all
does not clear licensing information. This
license cannot be disabled after it is enabled
on the switch.
Table 5.3: Common Commands (continued)
Command Description