Filter
Top Products
240
Intel
®
NetStructure™ 480T Routing Switch User Guide
RIP Configuration Example
Figure 13.4 illustrates a switch that has three VLANs defined as
follows:
Finance
• Protocol-sensitive VLAN using the IP protocol
• Ports 1 and 3 have been assigned
• IP address 192.207.35.1
Personnel
• Protocol-sensitive VLAN using the IP protocol
• Ports 2 and 4 have been assigned
• IP address 192.207.36.1
enable rip originate-default {always} cost
<metric> {tag <number>}
Configures a default route to be advertised by
RIP if no other default route is advertised. If
always is specified, RIP always advertises the
default route to its neighbors. If
always is not
specified, RIP adds a default route if there is a
reachable default route in the route table.
enable rip poisonreverse Enables the poison reverse algorithm for RIP.
The default setting is enabled. If you enable
poison reverse and split horizon, poison reverse
takes precedence.
enable rip splithorizon Enables the split horizon algorithm for RIP.
Default setting is enabled.
enable rip triggerupdates Enables triggered updates. Triggered updates
are a mechanism for immediately notifying a
router’s neighbors when the router adds or
deletes routes or changes the metric of a route.
The default setting is enabled.
Table 13.2: RIP Configuration Commands (continued)
Command Description