C H A P T E R 16 IPX Routing
303
configure ipxsap delete vlan [<name> | all] Disables IPX/SAP on an interface.
configure ipxsap vlan [<name> | all] delay
<msec>
Configures the time between each SAP packet
within an update interval. The default setting
is 55 milliseconds.
configure ipxsap vlan [<name> | all] [export-
filter | import-filter | trusted-gateway]
[<access profile> | none]
Configures the import, export, or trusted-
gateway options and specifies an access
profile.
configure ipxsap vlan [<name> | all] max-
packet-size <number>
Configures the MTU size of the IPX/SAP
packets. The default setting is 432 bytes.
configure ipxsap vlan [<name> | all] update-
interval <time> {hold-multiplier <number>}
Configures the update interval and hold
multiplier for IPX/SAP updates. This setting
affects both the periodic update interval of
SAP and the aging interval of learned routes.
The default update interval is 60 seconds.The
default multiplier is 3. The aging period is
calculated using the formula:
update-interval * multiplier = aging period
Triggered update is always enabled;
therefore, new information is processed and
propagated immediately.
configure ipxsap vlan <name> gns-delay
<msec>
Configures the amount of time the switch
waits before answering a GNS request. By
default, the switch answers a GNS request as
soon as possible (0 milliseconds).
enable ipxsap Enables IPX/SAP on the router.
enable ipxsap gns-reply {vlan <name>} Enables GNS-reply on one or all IPX
interfaces. If no VLAN is specified, GNS-
reply is enabled on all IPX interfaces. The
default setting is aging time (in seconds).
Table 16.5: IPX
§
/SAP Configuration Commands (continued)
Command Description